Iron Fence Work in Meridian, Idaho

Meridian Quality Fence installs iron fence in Meridian on fronts and pool edges that want pickets, not boards. Spear tops, rings, and powder-coated steel are the look people mean when they search iron. This is not a privacy wall.

Call (208) 925-2582 with a photo of the picket style and the gate width. We quote steel panels, not a wood bid painted black.

Iron Fence Options for Meridian Properties

Spear-top picket fronts

Vertical pickets, spear or flat, on a two-rail or three-rail frame. Black is the default. Other coats exist. Post spacing follows the panel. A wavy top line from the street means the posts were not set. We set them.

Pool-code spacing and closers

Openings, self-closing hinges, and a latch a child cannot work from outside. Bring the sheet. We hang the gate to that sheet. A pretty spear that does not close is a failed pool job. Slope at the deck is the usual fight.

Estate swing pairs on steel

Wide pairs at a drive. Drop rods, cane bolts, and posts that can take the weight. Automation is a different trade. We hang a manual pair that is square. If you already have an operator, say so before we pick hardware.

Rings and finials on a short run

Decorative rings, knuckles, or finials on a porch-length run. This is detail work. It prices like detail work. We do not sprinkle rings on a 200-foot ranch rail and call it iron. Keep this on the face people see from the walk.

How We Handle Iron Fencing in Meridian

1. Lock the picket style, height, and gate list from your photo or packet.
2. Measure openings and the slope at the slab.
3. Set steel posts in concrete on the panel layout.
4. Set panels and check spear height from the street.
5. Hang gates with closers if the sheet requires them. Test the latch.

We test the closer from both sides. A gate that closes in the shop and stands open on a crowned slab is not done. We adjust on the slab you have. Latch height is for the person who will use it, including a pool sheet if you brought one.

Materials and Methods

Powder-coated steel picket panels. Posts matched to the panel. Brackets from the same system. Stainless or coated bolts. Self-closing hinges and a magnetic or gravity latch when a pool sheet asks for them. Touch-up that matches the coat. We do not field-weld a panel job unless an opening is odd. We do not use wood 4x4s as iron posts. Picket spacing is a measurement, not a vibe. A string at the spears keeps the skyline honest. Summer heat expands long runs. We leave the gap the maker wants. Mower-deck chips get touched before rust blooms.

Iron is a layout job before it is a hang job. Panel width has to land on posts that also land on the walk and the meter. We do not cut a panel into an ugly stub because nobody measured the gas meter. We lay the run on the grass first when the lot is odd. Spear height is a skyline. One post high reads from the street more than a small chip in the coat. We fix the skyline. Pool lots add the closer and the latch to the bid as hardware, not as a favor. If the sheet you were given names a maximum opening, we measure pickets. If you do not have a sheet, say so. We still build a tight picket. We do not invent a legal number.

What Iron Fencing Costs in Meridian

Angi lists wrought iron around 25 to 55 per linear foot. Fixr puts installed wrought iron near 22 to 40 per linear foot, with example 209-foot jobs in the mid thousands. Thumbtack's iron job average sits near 1,888 nationally, which is a different math than a long custom run. Height, spear work, and gate hardware move it. We quote the picket. We do not post a menu.

Iron Fencing Questions

Is wrought iron still a real product?

Most residential 'iron' is mild steel with a powder coat, not antique wrought. The search is still iron fence. Spear tops, rings, and picket spacing are the look. We bid the panel you point at, not a museum piece.

What spacing do pool gates need?

Pool rules care about openings, self-closers, and self-latches. Bring the rule you were given. We build to that sheet. We do not print a code number on this page and hope it matches your lot. Photos of the pool edge help.

Can iron fencing be six feet tall?

Yes, if the packet and the city allow it. Most front-yard iron is shorter so the house stays visible. Tall iron is still see-through. If you need a solid screen, that is a different material. Do not buy tall pickets to hide a patio.

How do you keep iron from rusting?

Powder coat, not a brush from a hardware aisle. Chips at the mower deck rust first. We use the maker's touch-up. Irrigation hitting the same picket every dawn is a rust machine. Move the head if you can.

Call (208) 925-2582 with the picket photo. We bid that iron look. Include the walk width and whether a pool sheet is in play so the hardware list is right the first time.